In contrast to mechanical and pneumatic NC servo feeders - FANTY -Steel Coil Handling Equipment Manufacturer

NC servo feeder also known as servo feeder, it is PLC, servo motor, servo driver and other automation equipment to achieve accurate feeding.What is the NC servo feeder?NC feeder usually according to the different relaxation action, is divided into pneumatic NC feeder and mechanical NC feeder these two categories, the two types of feeder feeding principle is exactly the same, NC servo feeder mechanical relaxation with pneumatic relaxation what is the difference?

Feeding machines are frequently used to relax the various division methods, which are commonly separated into pneumatic and mechanical relaxing.To attain great efficiency, different molds and products require different approaches to relax.To achieve the desired effect, it is necessary to select different models of NC feeders. Pneumatic NC feeders are not limited by travel and can meet long-term demand relaxation; they are especially well-suited for large molds and non-high-speed stamping. Mechanical NC feeders relax quickly and over short distances.The primary distinction between the NC servo feeder's mechanical and pneumatic relaxation methods is in their respective modes of relaxation. The differences between them are as follows:

Mechanical NC servo feeder

Uses a mechanical type that hits the pole to relax, does not crush the material, adjusts easily, and does not get disturbed from the outside. It only needs to be adjusted to relax the material when it needs to be carried out in a test mold or when it needs to be re-inserted into the mold; the operation is easy and convenient.

The mechanical NC feeder is a press slide block with a relaxed rod device. When the slider is pressed downward, the feeder fuselage perlin relaxation movement is implemented by the rod. This is because the feeder needs to be punched by adding auxiliary equipment to the slider, which limits the punch's collocation to some extent. However, the benefit of this is that the relaxation is quick, making it ideal for quick steps away from high-speed processing production situations.

Pneumatic NC servo feeder

The feeder's upper roller is pulled by the cylinder in order to achieve relaxation. In order for the NC feeder to reach the relaxation state in this operation, the punch machine's CAM must transmit the rest signal to the solenoid valve, which in turn controls the cylinder action.Consequently, the pneumatic release mechanism has a slow relaxation rate, is susceptible to external air source power supply fluctuations and electronic accessory interference, is unsuitable for high-speed feeding, and requires rather sophisticated adjustment during operation. Every time the pneumatic NC feeder relaxes, it must control and relax in the electric control box; this makes adjustments more difficult than with the mechanical type when testing the mold or changing the material to enter the mold again.

The advantage of a pneumatic feeder is that it can be used in a wide range of applications without the need for additional accessories. It works by connecting the punching CAM NC group relaxation to the feeder solenoid valve relaxation signals. Finally, the solenoid valve control cylinder push or pull to relax on the cylinder dynamic action.

Pneumatic feeder is by connecting the relaxation of the’m CAM NC group, provided by the relaxation of the’m CAM to the feeder solenoid valve relaxation signals,Finally through the solenoid valve control cylinder push or pull to relax on the cylinder dynamic action, relax the loosening action is relatively missile.But the advantage is that no need to add additional accessories, wide application scope.

For any questions, you can get in touch with us directly at fanty@sz-fanty.com, and we'll help you figure out the problem.

Follow FANTY Channel:

Youtube: https://www.youtube.com/@fantydecoilerfeeder

Facebook: https://www.facebook.com/Fanty1229/

Linkedin:https://www.linkedin.com/company/fantydecoilerfeeder