Manual Decoiler for Unwinding 200mm Width Steel Coil
- Model
- MT Series Manual Steel Coil Handling Decoiler for sale
Item specifics
- Color
- Standard white (other colors are available)
- Payment
- 30% T/T as deposit, rest against shipping
- Certificate
- ISO, CE
- Customized Service
- Yes
Review
Description
FANTY · MT Series · Manual Decoiler A Manual Decoiler is a practical and cost-effective solution as a type of uncoilers — widths of 200 mm, material from 0.35 mm – 1.6 mm, coil OD to Ø1200mm. Send us your coil size, material and press data, and our engineers will confirm the right manual decoiler configuration for your line before you order. Application Typical parts and production lines that this manual decoiler feeds or supports. Body panels, brackets and chassis parts from steel coil. Motor laminations, switch housings and terminal strips. Washing-machine drums, refrigerator shelves and oven frames. Fasteners, brackets and structural fittings from coil steel. Why it works Strip and coil widths to 200 mm are supported across the model range. Handles material from 0.35 mm – 1.6 mm, so one machine covers your light and heavy gauges. Accepts coil outside diameters up to Ø1200mm without extra handling. Coils up to 500 kg can be loaded, so the line runs longer between changes. Coils are unwound smoothly with controlled tension, protecting surface finish and keeping line speed stable. Grips the coil inner diameter securely for safe handling during loading and unwinding. Specifications Specifications are taken from the factory data sheet for this model. Tell us your coil or part data and our engineers will confirm the exact configuration before you order. FANTY factory workshop. Built by FANTY The MT Series is produced in the FANTY workshop alongside our full range of decoilers, straighteners, feeders and presses. Every unit goes through the same controlled build sequence before it is released for shipment. Place the coil onto the mandrel using a coil car or crane. Pneumatic or hydraulic expansion grips the coil ID firmly. Set back tension to match line speed and coil weight. Strip is pulled smoothly into the downstream machine. On the assembly floor before test. Units in production at the factory. Machines prepared for delivery. FAQ Models range from 200 mm to 1,500 mm coil widths and from 500 kg to 20 tons coil weight. Tell us your coil data and we recommend the right model. Yes. Control voltage, motor voltage and plug type are configured to your local standard before shipping. Standard models ship in 15–25 working days. Custom configurations may need 30–40 days. We confirm the schedule when you place the order. We recommend keeping mandrel segments, brake pads and proximity sensors. A starter spare-parts list is included with every machine. One year from the bill of lading date. Technical support and replacement parts are available for the lifetime of the machine. Send us your material, coil or part data and press details. Our engineers will confirm the model, configuration and integration for your shop.Manual Decoiler for Unwinding 200mm Width Steel Coil
At a glance
Where This Manual Decoiler Works
Automotive stamping
Electrical components
Appliance metal parts
Construction hardware
Key Features of the MT Series
Widths up to 200 mm
Coil thickness 0.35 mm – 1.6 mm
Coil OD up to Ø1200mm
500 kg coil capacity
Motorized or hydraulic drive
Expandable mandrel system
MT Series Technical Specifications
Model MT-200 Coil Width 200 mm Coil Thickness 0.35 mm – 1.6 mm Coil I.D. Ø450–530mm Coil O.D. Ø1200mm Coil Loading Weight 500 kg Mandrel Expansion Manual Expansion 
Assembled, Test-Run and Packed in Our Factory
Load coil
Expand mandrel
Adjust brake
Feed strip
Manual Decoiler Questions, Answered
What coil sizes can these decoilers handle?
Do you provide voltage and plug customization?
How long is production and delivery?
What spare parts should I keep in stock?
What is the warranty period?
Ready to put the MT Series to work on your line?
