How frequently do the parts need to be replaced in the wafer stamping and feeding zigzag feeder?

How frequently do the parts need to be replaced in the wafer stamping and feeding zigzag feeder?

Summary

Wear and tear will occur as the machine is utilized. Then how frequently do the parts need to be replaced in the wafer stamping and feeding zigzag feeder?

How frequently do the parts need to be replaced in the wafer stamping and feeding zigzag feeder?
The yaw-type automatic feeder's architecture is based on a zigzag feeder that is moved left and right by a servo system. In wafer stamping production lines, it is frequently employed. Yaw feeders serve as auxiliary automation equipment that must work with punches for extended periods of time when they are in operation. In the event of a rush hour, they must run nonstop for 24 hours.

zigzag feeder
Wear and tear will occur as the machine is utilized. The mechanical characteristics and mechanical components of the apparatus will be worn down after extensive usage, and the circuit will deteriorate. It will not only impact the equipment's operating accuracy and stability, especially over a long period of time, but it will also compromise safety and reduce productivity. As a result, we need to promptly replace the yaw NC feeder's worn out components. So how frequently does the yaw feeder require part replacement?

The punch feeder. explanation of the interval between replacements of servo zigzag feeder spare components

1. The capacity of the filter capacitors employed in the circuit of the DC24V regulated power supply will decrease with time. It is advised to replace such electrical components after around 4 years.

2. Servo drives are typically included in NC servo series feeders. The capacity will be decreased due to the servo drives' age. Every five years, the servo drives and other accessories need to be checked and replaced in order to prevent breakdowns.

3. Because they have been used mechanically and electrically for so long, the electromagnetic contactors and relays in the slewing feeder's cabinet box are prone to failure. They often need to be replaced after five years.

The quality of the spare components used by each manufacturer varies, and some of them may be easily broken in a short period of time. As a result, the yaw feeder replacement time varies as well. Customers are advised to select common brands while buying equipment. Businesses purchase because the automated feeder accessories determine the overall machine's quality. The quality of the punch feeder will not be assured if the accessories are not chosen appropriately, and the after-sales service will be more difficult, cost more, and take longer.