Hydraulic Decoiler Machine for 5 Tons Steel Coil Unwinding
- Model
- MT Series Efficient Hydraulic Decoiler
Item specifics
- Color
- Standard white (other colors are available)
- Payment
- 30% T/T as deposit, rest against shipping
- Certificate
- ISO, CE
- Customized Service
- Yes
Review
Description
FANTY · MT Series · Hydraulic Decoiler A hydraulic uncoiler, also called Hydraulic Decoiler, is a steel coil handling equipment by using hydraulics — widths of 600mm, material from 0.1–3.0mm, coils to 5 t. Send us your coil size, material and press data, and our engineers will confirm the right hydraulic decoiler configuration for your line before you order. Application Typical parts and production lines that this hydraulic decoiler feeds or supports. Structural brackets and frames from heavy steel coil. Long structural members fed from thick-gauge coil. Cabinet and housing blanks from mid-gauge strip. Angle brackets and joining plates in volume. Why it works Strip and coil widths to 600mm are supported across the model range. Handles material from 0.1–3.0mm, so one machine covers your light and heavy gauges. Coils up to 5 t can be loaded, so the line runs longer between changes. Accepts coil outside diameters up to Ø1200mm without extra handling. Cylinder-driven mandrel grips heavy coils quickly and uniformly. Brake or drive control keeps strip tension steady into the straightener. Specifications Specifications are taken from the factory data sheet for this model. Tell us your coil or part data and our engineers will confirm the exact configuration before you order. MT Series assembly at the FANTY factory workshop. Built by FANTY The MT Series is produced in the FANTY workshop alongside our full range of decoilers, straighteners, feeders and presses. Every unit goes through the same controlled build sequence before it is released for shipment. Welded steel frame and mandrel supports are machined to size. Expansion cylinder, drive motor and control panel are fitted and wired. Each unit is tested with a full-weight coil to check expansion and payout. Machines are fixed and protected in wooden crates for shipping. On the assembly floor before test. Units in production at the factory. Machines prepared for delivery. FAQ A hydraulic cylinder expands the mandrel segments outward to grip the coil inner diameter, giving uniform pressure that is safer and faster than hand-wheel expansion on heavy coils. Hydraulic decoilers are built for coils from roughly 3 to 20 tons. Send your coil weight, OD, ID and width and we will confirm the model and mandrel size. Yes. FANTY builds complete coil-fed press lines, so we can match this decoiler to your existing equipment or supply the full line. The control panel covers jog, forward/reverse and speed; heavier models add coil-car and pressing-arm options. Each unit is run-tested with coil, then fixed in a wooden export crate. English manuals, wiring diagrams and a starter spares list are supplied. Send us your material, coil or part data and press details. Our engineers will confirm the model, configuration and integration for your shop.Hydraulic Decoiler Machine for 5 Tons Steel Coil Unwinding
At a glance
Where This Hydraulic Decoiler Works
Automotive stamping
Trailer & chassis parts
Appliance panels
Hardware & brackets
Key Features of the MT Series
Widths up to 600mm
Coil thickness 0.1–3.0mm
5 t coil capacity
Coil OD up to Ø1200mm
Hydraulic expansion
Tension-controlled payout
MT Series Technical Specifications
Model MT-600F Coil Width 600mm Coil Thickness 0.1–3.0mm Coil Loading Weight 5 t Coil I.D. Ø508mm Coil O.D. Ø1200mm 
Assembled, Test-Run and Packed in Our Factory
Frame fabrication
Hydraulic assembly
Load & run test
Export packing
Hydraulic Decoiler Questions, Answered
How does hydraulic mandrel expansion work?
What coil weights can it handle?
Can it run with my existing straightener and feeder?
What controls are included?
How is the machine shipped?
Ready to put the MT Series to work on your line?
